legendsemi

LH9306

The LH9306 is a dual-channel bidirectional I²C and SMBus level shifter with an enable (EN) input. Its operating voltage ranges are defined as: 1.2 V to 3.3 V for the V_REF1 pin, and 1.8 V to 5.5 V for the V_REF2 pin. The LH9306 supports bidirectional voltage translation between 1.2 V and 5 V without any dedicated direction-control pin. Its low on-resistance (RON) minimizes propagation delay across connected signal lines. When EN is pulled high, the internal switches turn on, connecting SCL1/SDA1 I/Os to SCL2/SDA2 I/Os respectively to allow bidirectional data transmission between the two ports. When EN is pulled low, the switches turn off, presenting a high-impedance state between the ports. In the EN-low state, the LH9306 also provides robust isolation against genuine negative voltage spikes. Beyond level translation, the LH9306 can isolate 400 kHz fast-mode buses from 100 kHz slow-mode buses by disconnecting low-speed buses via EN pin control during fast-mode communication. The LH9306 is supplied in a 1.4 mm × 1 mm DFN package.
LH9306

Product Features

• Designed for mixed-mode I²C applications, providing 2-bit bidirectional level translation for SDA and SCL signal lines

• Fully compliant with I²C and SMBus specifications

• Maximum propagation delay < 3 ns, compatible with standard-mode and fast-mode I²C devices as well as multi-master systems

• Supports level translation between the following voltage domains:

– 1.2 V VREF1 paired with 1.8 V, 2.5 V, 3.3 V or 5 V VREF2

– 1.8 V VREF1 paired with 2.5 V, 3.5 V or 5 V VREF2

– 2.5 V VREF1 paired with 3.3 V or 5 V VREF2

– 3.3 V VREF1 paired with 5 V VREF2

• Bidirectional voltage translation with no dedicated direction control pin required

• Ultra-low on-resistance down to 2.4 Ω between I/O ports to significantly reduce signal distortion

• Open-drain I²C I/O pins (SCL1, SDA1, SCL2, SDA2)

• 5 V-tolerant I²C I/O pins to support mixed-signal operation

• SCL1, SDA1, SCL2 and SDA2 pins enter high-impedance state when the EN pin is pulled low

• Deadlock-free isolation operation available under EN low condition

• Negative voltage spike isolation capability when EN is low

Application Scenario

• I²C, SMBus, PMBus, MDIO, UART, low-speed SDIO, GPIO and other dual-signal interfaces

• Servers

• Routers (telecommunication switching equipment)

• Personal computers

• Industrial automation