legendsemi

LHA5115S

The LHA5115 is a low power, low noise, 24-bit, sigma-delta (Σ-Δ) analog-to-digital converter (ADC) that integrates an analog front end (AFE) for eight fully differential or 16 single-ended, high impedance (≥1 MΩ), bipolar, ±10 V voltage inputs. The LHA5115 integrates key analog and digital signal conditioning blocks to configure eight individual setups for each analog input channel in use. The LHA5115 features a maximum channel scan rate of 24.845SPS (40.25μs) for fully settled data. The embedded 2.5V, low drift (±3ppm/°C), band gap internal reference (with output reference buffer) reduces the external component count. The digital filter allows flexible settings, including simultaneous 50Hz and 60Hz rejection at a 27.27SPS output data rate. The user can select different filter settings depending on the requirements of each channel in the application. The automatic channel sequencer enables the ADC to switch through each enabled channel. The LHA5115 operates with a single power supply that allows simplified use in galvanically isolated applications. The specified operating temperature range is −40°C to +105°C. The LHA5115 is housed in a 40-lead, 6mm × 6mm QFN.
LHA5115S

Product Features

• 24-bit ADC with integrated AFE

• Fast and flexible output rate: 2.5SPS to 125kSPS

• Channel scan data rate of 24.845SPS per channel (40.25μs settling)

• 85dB common mode rejection of 50Hz and 60Hz at 20SPS per channel

• ±10V inputs, either 8 differential or 16 single-ended

  - VIN pin absolute maximum rating ±65V

  - Absolute input pin voltage up to ±20V

  - Minimum 1MΩ input impedance

• On-chip 2.5V reference

  - ±0.12% initial accuracy at 25°C, ±3 ppm/°C (typical) drift

• Internal or external clock

• Power supplies

  - AVDD = 4.5V to 5.5V

  - IOVDD = 2V to 5.5V

  - Total current consumption AVDD + IOVDD (IDD) = 8.4mA, all buffers on

• Temperature range: −40°C to +105°C

• 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)

  - SPI, QSPI, MICROWIRE, and DSP compatible

Application Scenario

• Process control

  - Programmable logic controller (PLC) and distributed control system (DCS) modules

  - Instrumentation and measurement