legendsemi

LHA7530

The LHA7530 is a highly integrated 24Bit ΔΣ Analog-to-Digital Converter (ADC). The ADC is optimized for measuring low-level unipolar or bipolar signals in weigh scale, process control, scientific, and medical applications. To accommodate these applications, the ADC includes a very-low-noise, chopper-stabilized instrumentation amplifier (9.5 nV/√Hz @ 0.1 Hz) with a gain of 64X / 128X. This device also includes a fourth-order ΔΣ modulator followed by a digital filter which provides selectable output word rates of 5, 6.25, 7.5, 10, 12.5, 15, 25, 30, 50, 60, 100, 120, 200, 240, 400, 480, 800, 960, 1600, 1920, 3200, and 3840 SPS (MCLK = 4.9152 MHz). Open circuit detections are provided at the analog inputs for sensor connection diagnosis. The internal oscillator, an external clock, or an external crystal can be used as the clock source to the device. To ease communication between the ADC and a microcontroller, the converter includes a simple three-wire serial interface which is SPI and Microwire compatible with a Schmitt-trigger input on the serial clock (SCLK). High dynamic range, programmable output rates, and flexible power supply options make this device an ideal solution for weigh scale and process control applications.
LHA7530

Product Features

• Instrumentation Amplifier, 64X / 128X

 - 9.5 nV/√Hz @ 0.1 Hz (No 1/f noise)

 - 2nA Input Current

• Digital Gain Scaling up to 40x

• High accuracy

 - Linearity Error: 1.5ppm/FSR

 - Noise Free Resolution: Up to 21 bits

 - Offset<1μV, offset drift 1nV/℃

 - Gain drift 0.5ppm/℃

• Scalable VREF Input: Up to Analog Supply

• Internal or external clock

• Open Circuit Detection

• Simple Three-wire Serial Interface

 - SPI™ and Microwire™ Compatible

 - Schmitt-trigger on Serial Clock (SCLK)

• Onboard Offset and Gain Calibration Registers

• Selectable Word Rates: 5 to 3,840 SPS

• 50 / 60 Hz Rejection

• Low power: 1.8mA supply current, VA=VD=5V

• Power Supply Configurations

 - VA+ = 2.7V–5V; VA- = 0 V; VD+ = 2.7 V to 5 V

 - VA+ = +2.5 V; VA- = -2.5 V; VD+ = 2.7 V to 5 V

Application Scenario