legendsemi

LHA6961

The LHA6961 is an 16-bit, 5 MSPS, charge redistribution successive approximation (SAR), analog-to-digital converter (ADC). The SAR architecture allows unmatched performance both in noise and in linearity. The LHA6961 contains a low power, high speed, 16-bit sampling ADC, an internal conversion clock, and an internal reference buffer. On the CNV± edge, the LHA6961 samples the voltage difference between the IN+ and IN− pins. The voltages on these pins swing in opposite phase between 0 V and 4.096 V and between 0 V and 5 V. The reference voltage is applied to the part externally. All conversion results are available on a single LVDS self clocked or echoed clock serial interface. The LHA6961 is available in a 32-lead QFN with operation specified from −40°C to +125°C.
LHA6961

Product Features

• Throughput: 5 MSPS

• 16-bit resolution with no missing codes

• Excellent ac and dc performance

— Dynamic range: 95 dB

— SNR: 93.7 dB

— THD: −109 dB

— INL: ±1 LSB

— DNL: ±0.3 LSB (typical), ±0.6 LSB (maximum)

• True differential analog input voltage range: ±4.096 V or ±5 V

• Low power dissipation

— 34.4 mW at 5 MSPS with external reference buffer (echoed clock mode)

— 54.9 mW at 5 MSPS with internal reference buffer (echoed clock mode)

— 27.4 mW at 5 MSPS with external reference buffer (self clocked mode, CNV± in CMOS mode)

• SAR architecture

— No latency/pipeline delay

• External reference options: 2.048 V buffered to 4.096 V (internal reference buffer), 4.096 V, and 5 V

• Serial LVDS interface

• Self clocked mode

• Echoed clock mode

— LVDS or CMOS option for conversion control (CNV± signal)

• Operating temperature range of −40°C to +125°C

• 32-lead, 5 mm × 5 mm LFCSP (QFN)

Application Scenario

• Digital imaging systems

— Digital X-rays

— Computed tomography

— IR cameras

— MRI gradient control

• High speed data acquisition

• Spectroscopy

• Test equipment