legendsemi

LHA8951F

The LHA8951 is an 18-bit successive approximation register (SAR) analog-to-digital converter (ADC) operating from a single supply (VDD). It integrates a low-power high-speed 18-bit sampling ADC and a versatile serial interface port. On the rising edge of CNV, the LHA8951 samples the differential voltage between the IN+ and IN- pins; the voltage swings on these pins are typically complementary between 0 V and VREF. The reference voltage (REF) is supplied externally and can operate independently of the analog supply VDD. Power consumption varies linearly with throughput rate. The SPI-compatible serial interface uses the SDI input to daisy-chain multiple ADCs onto a 3-wire bus, with an optional busy status indicator. A separate VIO supply rail enables logic-level compatibility with 1.8 V, 2.5 V, 3 V, and 5 V host logic. The LHA8951 is available in 10-lead MSOP and 10-lead 3 mm × 3 mm QFN packages, with an operating temperature range of -40 °C to +125 °C.
LHA8951F

Product Features

  • 18-bit resolution, no missing codes
  • Throughput rate:
    • LHA8951F: 1 MSPS
    • LHA8951C: 500 kSPS
  • Low power consumption
    • 3.6 mW @ 1 MSPS (VDD only)
    • 7 mW total power @ 1 MSPS
    • 70 μW @ 10 kSPS
  • Integral Non-Linearity (INL): ±1 LSB typical
  • Dynamic range: 99 dB
  • SNR: 98 dB
  • SINAD: 97.8 dB
  • THD: -116 dB
  • True differential analog input range: ±VREF
    • 0 V to VREF (VREF ranges from 2.5 V to 5.0 V)
  • Pseudo-differential analog input
    • Arbitrary common-mode input
    • Single-ended input
  • No pipeline latency
  • Single 1.8 V supply operation, SPI logic interface compatible with 1.8 V / 2.5 V / 3 V / 5 V logic levels
  • Daisy-chainable multiple ADCs with optional busy indicator output
  • 10-lead packages: MSOP and 3 mm × 3 mm QFN

Application Scenario

  • Battery-powered equipment
  • Data acquisition systems
  • Medical instrumentation
  • Seismic data acquisition systems