legendsemi

LH32M3C46CWZG

The LH32M3XX series of MCUs are fully integrated single-package devices integrating high-performance analog and digital peripherals and a 72 MHz ARM Cortex-M3 processor.
LH32M3XX integrates a series of peripherals, which can be configured by software control according to application needs, these peripherals include 1 UART, 3 I2C and 3 SPI serial I/O communication controllers, 4 dedicated GPIOs, 32-unit programmable logic array (PLA), 3 general-purpose 16bits timers, 1 32bits timer, plus wakeup timer (wakeup timer-RTC) and system watchdog timer (WDT).
LH32M3XX adopts low-power ARM Cortex-M3 processor, and the peak performance of 32-bit RISC processor can reach up to 90 MIPS. On-chip PLL supports 72MHz clock frequency.
Integrates two 128 kB Flash memories and one 32 kB SRAM, and the two Flashes support address exchange.
Integrated multi-input 12bit ADC (external 16-channel, 4-channel on-chip), 4-channel 12bit VDAC, built-in temperature sensor and 4-channel analog comparator. At the same time, a 2.5V reference voltage supporting external load (5mA) is integrated.
On-chip factory firmware supports serial program download via I2C.
LH32M3C46CWZG

Product Features

● Kernel
− 32-bit ARM Cortex-M3
− Up to 72MHz operating frequency
● Memory
− 2 x 128Kbytes of FLASH memory
− 32Kbytes of SRAM
− 4Kbytes Cache
● Clock
− Internal 16M RC oscillator (HRC), accuracy ±3%
− Internal 32KHz RC oscillator (LRC), accuracy ±10%
− Phase-locked loop (PLL), up to 72MHz
− Support external 16MHz/8MHz crystal oscillator
● Power management
− Support power-on/power-down reset (POR/PDR)
− Support DVDD Power Supply Monitoring (PSM)
● Analog-to-Digital Converter (ADC)
− 16 external inputs, 12-bit SAR ADC
− Up to 1μS switching time
− Input voltage conversion range: 0~2.5V, or 0~4.096V
− Built-in temperature sensor, accuracy ±3°C
● Digital-to-analog converter (DAC)
− 4 independent resistor string DACs
− Integrated rail-to-rail voltage output buffer with a maximum load current of 10mA
● 4 analog comparators
− Response time 10μS
− Support internal VDAC as reference source
− Adjustable hysteresis voltage (8mV~260mV)
● On-chip reference voltage
− 2.5V reference voltage supports a maximum load of 5mA
● General input and output (I/O)
− 38 I/Os support up to 72MHz operating frequency
● timer
− 4 general-purpose 16-bit timers
− Watchdog timer
● External interrupt (EXTI)
− 16 external interrupt sources
− Any GPIO can be configured as an external interrupt
● 3 Serial Peripheral Interfaces (SPIs)
● 1 UART
● I2C
− 3-way I2C supports master/slave mode
− Supports up to 1M bit/s
● 32-way Programmable Logic Array (PLA)
● Serial Single Wire Debug (SWD)
● Working environment
− AVDD voltage: 2.7 to 5.5V
− DVDD voltage: 2.7 to 5.5V
− IOVDD voltage: 2.7 to 5.5V
● Temperature range
− 40°C to 105°C

● Packaging

− WLCSP: 4.02mm x 3.82mm, 72 pins

− QFN48 6mm x 6mm

− QFN64 8mm x 8mm

 

Application Scenario

● Data collection

● Industrial control

● Medical equipment